series am 2gh -z 2 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12. b 1 of 4 north america only features: models single output model input voltage (v) output voltage (v) output current max ( ma) maximum capacitive load (f) efficiency (%) am2 gh - 1203sz 4.5 - 18 3.3 500 1000 7 0 am2 gh - 1205sz 4.5 - 18 5 400 1000 74 am2 gh - 1212sz 4.5 - 18 12 166 220 7 8 am2 gh - 1215sz 4.5 - 18 15 133 100 7 8 am2gh - 2403sz 9 - 36 3.3 500 1000 71 am2gh - 2405sz 9 - 36 5 400 1000 7 8 am2gh - 2412sz 9 - 36 12 166 220 79 am2gh - 2415sz 9 - 36 15 133 100 79 am2gh - 4803sz 18 - 75 3.3 500 1000 72 am2gh - 4805sz 18 - 75 5 400 1000 7 5 am2gh - 4812sz 18 - 75 12 166 220 7 5 am2gh - 4815sz 18 - 75 15 13 3 100 7 6 models dual output model input voltage (v) output voltage (v) output current max (ma) maximum capacitive load (f) efficiency (%) am 2 gh - 1205dz 4.5 - 18 5 200 470 7 7 am2 gh - 1212dz 4.5 - 18 12 83 100 78 am2 gh - 1215dz 4.5 - 18 15 66 47 7 7 am2 gh - 2405dz 9 - 36 5 200 470 7 5 am2gh - 2412dz 9 - 36 12 83 100 77 am2gh - 2415dz 9 - 36 15 66 47 7 8 am2gh - 4805dz 18 - 75 5 200 470 7 4 am2gh - 4812dz 18 - 75 12 83 100 7 4 am2gh - 4815dz 18 - 75 15 66 47 7 5 note: all specifications in this datasheet are m easured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. input specifications parameters nominal typical maximum units voltage range 12 24 48 4.5 - 18 9 -36 18 - 75 vdc filter capaci tor start up time 30 ms absolute maximum rating 12 24 48 25 50 100 vdc peak input voltage time 100 ms on/off c ontrol on : 0 to 0.6vdc (or open) ; off :2.7 to 15.0vdc, off idle current: 2 - 4ma no load input current 40 ma input r eflected c urren t 20 ma ? sip 8 package ? ultra - wide input range 4:1 ? low ripple and noise ? 1 6 00vdc i/o isolation ? continuous short circuit protection ? efficiency up to 79 % ? - 40oc to +85oc operating temperature range ? remote on/off control
series am 2gh -z 2 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12. b 2 of 4 north america only isolation specifications parameters conditions typical rated units tested i/o voltage 3 sec 1600 vdc resistance >1000 mohm capacitance 200 pf output specifications parameters conditions typical maximum units voltage accuracy 1 % cross regulation (dual output models) 25% load on one output - 100% load on second load 5 % short circuit protection continuous short circuit restart auto - recovery line voltage regulation 0. 2 % load voltage regulation from 0 % to 100% load 1 % temperature coefficient 0.02 %/ o c ripple & noise 20mhz bandwidth 3 0 mv p - p general specifications parameters conditions typical maximum units switching frequency 100 % load 1 00 khz operating temperature - 40 to 85 o c storage temperature - 40 t o +125 o c maximum case temperature 100 o c derating above 71 c 5 % / o c cooling free air convection humidity 95 % rh case material non conductive black plastic potting material silicon (ul94v - 0 rated) weight 4.8 g dimensions (l x w x h) 0.86 x 0.36 x 0.44 inches 21.85 x 9.20 x 11.10 mm mtbf >1,700 ,000 hrs (mil - hdbk - 217f, ground benign, t=+25oc) hours maximum soldering temperature 1.5mm from case for 10 second 260 o c transient r ecovery time 250 u s transient recovery deviation 3 % safety specifications parameter agency approval s ce standards en55022 : 2006 + a1:2007, class a en55024 :1998 + a1:2001 + a2:2003 iec61000 - 4 - 2:1995 + a1:1998 + a2:2000, perf. criteria b iec61000 - 4 - 3 :2006 , perf. criteria a iec61000 - 4 - 4 :2004 , perf. cri teria b (external 220uf/100v cap required) iec61000 - 4 - 5 :2005 , perf. criteria b (external 220uf/100v cap required) iec61000 - 4 - 6 :2007 , perf. criteria a iec61000 - 4 - 8, perf :1993 + a1:2000, criteria a note: also designed to meet iec 60950 - 1:2001 pin out specifications pin single dual 1 - v input - v input 2 + v input + v input 3 on/off control on/off control 5 n.c. n.c. 6 + v output + v output 7 - v output common
series am 2gh -z 2 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12. b 3 of 4 north america only nc: not connected dimensions printed face 21 . 85 ( 0 . 85 ) 10 . 60 ( 0 . 42 ) 0 . 50 ( 0 . 02 ) 2 . 54 ( 0 . 10 ) 17 . 78 ( 0 . 70 ) 3 . 05 ( 0 . 12 ) 9 . 20 ( 0 . 36 ) 11 . 10 ( 0 . 44 ) 9 . 20 ( 0 . 36 ) 3 . 50 ( 0 . 14 ) 0 . 25 ( 0 . 01 ) 0 . 50 ( 0 . 02 ) 0 . 50 ( 0 . 02 ) derating - 40 - 20 0 20 40 60 80 100 100 80 60 40 20 0 safe operating area output power (%) 85 ambient temperature o c free air convection 71 o c 30 contro l on/off pin connection example 8 n.c. - v output
series am 2gh -z 2 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12. b 4 of 4 north america only recommended circuits conducted and radiated emissions l c1 dc/dc converter +v input -v input +v output load -v output eft/ surge c 2 dc / dc converter + v input - v input + v output load - v output 220 uf / 100 v note: 1. datasheets are updated as needed and as such, specifications are subject to change without notice. once printed or downloaded, datasheets are no longer controlled by aimtec; refer to www.aimtec.com for t he most current product specifications. 2. product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measu red at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary and may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nu clear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s standard terms of sale available at www.aimtec.com. vcc (vdc) r1 (k ) r2(k) zd1(v , ma) 4.5 - 18 7.5 0 10, 5 9 - 36 18 2.2 18, 5 18 - 75 33 6.8 36, 5 input voltage (v) c1 (uf/v) l(uh) 12 10/35 2.5 24 2.2/35 10 48 2.2/35 18
|
